netup.lha network/misc - Comments

HKvalhe (85.167.227.247) @ 02 Sep 2013, 05:07.03

Mon, 02 Sep 2013 17:07:03 +0200

By: HKvalhe (85.167.227.247)

Actually, Netup's Timeout is working very well in 3 seconds, then it closes immerdiately after assuring it's online. This is the way i wanted it, so everything is just fine :)

HKvalhe (77.40.194.23) @ 02 Sep 2013, 12:13.43

Mon, 02 Sep 2013 12:13:43 +0200

By: HKvalhe (77.40.194.23)

Will try. Thanks Jurassicc :-)

jurassicc (217.42.95.22) @ 01 Sep 2013, 01:05.35

Sun, 01 Sep 2013 13:05:35 +0200

By: jurassicc (217.42.95.22)

well what you can do is type c:netshutdown in the cli. set the timeout to 20 then run netup after 20secs you will see that it gives up and quits. then run it again and do c:addnetinterface devs:netinterface/xxxx where xxxx is your interface file. whilst its flashing and you'll see it come online.

HKvalhe (85.167.227.247) @ 01 Sep 2013, 09:36.15

Sun, 01 Sep 2013 09:36:15 +0200

By: HKvalhe (85.167.227.247)

Thank you, Jurassicc :) Yes, 10 is usually fine. I managed to reduced it also down to 3 seconds, but no lower than that. It would help to have more information on what is the best recommended seconds to really use for the Timeout. Thank you so much for the help, Jurassicc :)

jurassicc (217.42.95.22) @ 01 Sep 2013, 08:10.18

Sun, 01 Sep 2013 08:10:18 +0200

By: jurassicc (217.42.95.22)

I would stay 10 is fine. But if you want it shorter keep reducing it by 1 until it doesn't work the use the number it last worked at.

HKvalhe (85.167.227.247) @ 31 Aug 2013, 07:03.47

Sat, 31 Aug 2013 19:03:47 +0200

By: HKvalhe (85.167.227.247)

Just a question. What is the minimal seconds recommendation for the Timeout here?

HKvalhe (77.40.194.23) @ 30 Aug 2013, 08:16.44

Fri, 30 Aug 2013 08:16:44 +0200

By: HKvalhe (77.40.194.23)

DONOTWAIT command is not needed when placing it in WBStartup Prefs, as long as you leave the button for choosing amount of seconds to wait UNTICKED. That function appears as DONOTWAIT instead. 
 
I have reduced the Timeout to 10 seconds instead :)

HKvalhe (85.167.227.247) @ 29 Aug 2013, 04:47.17

Thu, 29 Aug 2013 16:47:17 +0200

By: HKvalhe (85.167.227.247)

Tested and working brilliant! Added it to WBStartup Prefs and Timeout is at 20 seconds! I really recommend this tool! How about creating a nice drawer for Netup with icon? I also wonder if Netup drawer should be either in SYS:Utillities or in SYS:Internet?

HKvalhe (77.40.194.23) @ 29 Aug 2013, 09:53.23

Thu, 29 Aug 2013 09:53:23 +0200

By: HKvalhe (77.40.194.23)

This one might come in handy :) Gonna give it a test later today :)

cha05e90 (79.223.119.108) @ 29 Aug 2013, 09:30.15

Thu, 29 Aug 2013 09:30:15 +0200

By: cha05e90 (79.223.119.108)

Nice and smart (and good looking!) tool, thanks!

jurassicc (217.42.95.22) @ 29 Aug 2013, 08:12.36

Thu, 29 Aug 2013 08:12:36 +0200

By: jurassicc (217.42.95.22)

Don't forget to add DONOTWAIT as the third tooltype, if you have it in wbstartup.

jurassicc (217.42.95.22) @ 29 Aug 2013, 08:08.02

Thu, 29 Aug 2013 08:08:02 +0200

By: jurassicc (217.42.95.22)

Don't forget to add DONOTWAIT as the third tooltype, if you have it in wbstartup.

jurassicc (217.42.95.22) @ 29 Aug 2013, 08:07.39

Thu, 29 Aug 2013 08:07:39 +0200

By: jurassicc (217.42.95.22)

Don't forget to add DONOTWAIT as the third tooltype, if you have it in wbstartup.

tommysammy (93.221.22.190) @ 29 Aug 2013, 05:29.16

Thu, 29 Aug 2013 05:29:16 +0200

By: tommysammy (93.221.22.190)

Nice tool